Rs29 combines the outstanding wear rate of the rs19 with a slightly higher coefficient of friction and initial bite. Due to its excellent driveability pagid endurance materials are also often used for sprint races. Application: all endurance racing cars from group n (speed-wc, koni cup), group a up to GT and sport car racing (e.g. Dp in us rolex).

General Fitment

Allows greater camber adjustment possibilities at the front using the 2-piece split control arm set.

Includes 1, 2, 3, and 10mm shims to cover a wide range of camber adjustment.

A must for track and club sport vehicles.

Fits: turbo (07-09), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01)

General Fitment

The girodisc system is a direct replacement for the oe disc with the addition of girodisc provided caliper spacers and longer bolts. Girodisc rotor is slightly larger than the OEM rotor at 350mm versus 330mm providing greater braking force and cooling capacity.

The central hat section of girodisc rotor is made from strictly u.s. Sourced 6061-t6 aircraft specification aluminum. The disc is made from girodisc own proprietary cast iron, poured in the usa and machined from start to finish in house at girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 8 ...(choose a part on the right to read more)

General Fitment

Ksport adjustable endlinks replace the non-adjustable factory endlinks for many vehicles, allowing you to lower the vehicle and change swaybar preload. These replace the weak stock endlinks to further reduce the chance for flex under hard cornering.


Note: actual product may vary from slightly from photos.

All images represent the item, but actual product may vary depending on make and model.

General Fitment

Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.

Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)

General Fitment

Front right; amber usa version

High friction racing compound with high content of ceramic materials, fade resistance up to 700 deg. C (1,300 deg. F). It combines a 20% higher friction value than the rs14 with a slightly increased pad wear. Although the rs15 has a good controllability and release characteristic it needs finesse to avoid over braking the car, especially with lightweight cars or cars with boosted brakes. Applications: touring cars, rally cars (tarmac), GT cars, wsc, high down-force single-seaters, nascar.

General Fitment

Front left; clear European version

The light-weight hollow sway bars are half the weight of a solid bar with the same stiffness. they are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability.

Bearing blocks, drop links, and swaybar arms are cnc machined from aircraft-quality 6061-t6 aluminum for its high strength/weight ratio.

Complete with fully adjustable drop links to eliminate suspension preload.

Correctly sized, precision, teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. no wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.

All necessary hardware is provided in zinc plated...(choose a part on the right to read more)

Everything you need to convert your old worn out bumpers to the fabulous stainless steel chrome look. package consist of;
1 front stainless bumper
1 front bumper top sea
1 front top seal hardware six 6 mm nuts six 6 mm washers
4 bumper dog bone mounting blocks
8 8x40 shank front and rear bumper bolts, 8 large 8mm washers, 8 serrated locking washers
1 set of left and right front driving light grilles
1 front grill mounting hardware kit for stainless bumper
2 two rear license plate lights
1 rear bumper top seal
1 rear bumper top seal mounting hardware 6 6 mm nuts 6 6 mm washers
4 license plate light screws 3.5x16 900 143 016 01
1 chrome bumper plug

The moshammer stormforce evo rs rear diffuser builds upon the aggressive lines found on the stormforce evo rs front spoiler and side skirts. The rear diffuser design incorporates more dramatic contours that define and set off the exhaust tips. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the 991.2 stormforce evo rs package, the result is a confident, cohesive stance with balanced downforce thoroughly tested by moshammer. Features: increased aero efficiency reduced turbu...(choose a part on the right to read more)

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.